Analisa Kesehatan dan Keselamatan Kerja (K3) menggunakan Metode Hazard Identification Risk Assessment and Risk Control (HIRARC) pada Pembangunan Gerbang Banyuran Tanjung Jati Unit 5 dan 6 di PT. Supraco Indonesia
DOI:
https://doi.org/10.56071/jtmsi.v2i2.554Keywords:
HSE, HIRARC, sistem manajemen K3, risk control, risk assessmentAbstract
This study analyzes Occupational Health and Safety (K3) in the construction of the Banyuran Tanjung Jati Gate Units 5 and 6 at PT. Supraco Indonesia, utilizing the Hazard Identification Risk Assessment and Risk Control (HIRARC) method. HIRARC is a systematic process used to identify hazards, assess risks, and control them to prevent accidents. The research identifies 16 processes, categorizing potential hazards such as material spillage, high-speed driving, and unsafe working conditions like slippery surfaces. Risk assessments show that most identified risks are low, with a few posing moderate risks, such as minor injuries and dehydration. Risk controls implemented include proper safety signage, the use of personal protective equipment (PPE), and ensuring worker competency. These measures aim to minimize workplace accidents and enhance safety for all involved in the construction project.
References
A. Anggara, “Analisis Keselamatan Dan Kesehatan Kerja (K3) Menggunakan Metode Hazard and Operability Pada Bagian Produksi Di Pt Wahana Lestari Makmur Indralaya,” 2019.
ricko aditya Pamungkas, “KERJA PADA PT KA PROPERTI MANAJEMEN Disusun Oleh : Ricko Adhitya Pamungkas INSTITUT INFORMATIKA DAN BISNIS PENERAPAN SISTEM KESELAMATAN DAN KESEHATAN KERJA ( K3 ) PADA PT . KA PROPERTI MANAJEMEN AREA,” 2020.
A. S. Wulandari, Penerapan Metode Hirarc (Hazard Identification, Risk Assessment and Risk Control) Pada Proyek Wika Tower Jakarta Timur Pt Wijaya Karya (Persero). 2015.
Hikmatunnazira and R. Islamiyah, “Analisis Bahaya Dan Upaya Pencegahan Kecelakaan Kerja Pada Departement Produksi Area Iii Pt Petrokimia Gresik,” Univ. Int. Semen Indones. Gresik, vol. 1, no. 1, 2021.
A. A. CHOLIL, S. SANTOSO, T. R. SYAHRIAL, E. C. SINULINGGA, and R. H. NASUTION, “Penerapan Metode Hiradc Sebagai Upaya Pencegahan Risiko Kecelakaan Kerja Pada Divisi Operasi Pembangkit Listrik Tenaga Gas Uap,” J. Bisnis dan Manaj. (Journal Bus. Manag., vol. 20, no. 2, pp. 41–64, 2020, [Online]. Available: https://jurnal.uns.ac.id/jbm/article/view/54633
F. Ramadhan, “Analisis Kesehatan dan Keselamatan Kerja (K3) menggunakan metode Hazard Identification Risk Assessment and Risk Control (HIRARC),” Semin. Nas. Ris. Terap., no. November, pp. 164–169, 2017.
Fabiana Meijon Fadul, “Analisa potensi bahaya pada tahapan proses pengecoran logam menggunakan metode hirarc,” 2019.
A. R. Baraka, “Gambaran Perilaku Keselamatan dan Kesehatan Kerja Pada Pekerja di PT PP (Persero) Tbk Proyek Pemabangunan Paket 4 Gedung APSLC, DLC, TILC, dan FRC Universitas Gadjah Mada Yogyakarta,” FKM Univ. Ahmad Dahlan, pp. 1–59, 2020.
