Analisis Perbandingan Pengaruh Performa Aliran Natural dan Penggunaan Sluice Gate (Pintu Air) Pada Kincir Air Dengan Pendekatan Kajian Teoritis
DOI:
https://doi.org/10.56071/jtmsi.v1i2.426Keywords:
Kincir Air, Aliran Air, Kecepatan, Pintu Air, Putaran.Abstract
The water wheel is defined as a mechanical device in the form of a wheel with blades (buckets or spatulas) around the edges which are on the horizontal axis of water as the working fluid. The water flowing into and out of the wheel has no excess pressure, only atmospheric pressure. The speed of the water flowing into the wheel must be large, because if the speed is large, the impetus on the blades of the water wheel will be greater. Comparison of the Effect of Natural Flow Performance and the Use of Sluice Gate on the Wheel. The use of Sluice Gate on the Waterwheel affects the performance of the waterwheel and from several variations in the width of the sluice gate flow gap (25mm), (35mm), and (40mm) with a sluice gate flow gap of 40 mm with an efficiency of 38.12 % at 40 rpm rotation, which is 13 Watt higher than the natural flow test at 40 rpm, the rotation speed is 5.11 watts with an efficiency of 10%, and the lowest power at 10 rpm is 3 watts and an efficiency of 6% with a discharge of 12 liters per second.
References
[2] Kementrian ESDM RI, Statistik Ketenaga Listrikan Indonesia. Jakarta: Kementerian ESDM, 2017.
[3] S. Pietersz, R., Soekono, R.,& Wahyudi, “Pengaruh Jumlah Sudu terhadap Kinerja Turbin Kinetik Roda Tunggal,” urnal Rekayasa Mesin Vol.4, No.3 Tahun 2013 220-226, vol. 4, no. 3, pp. 220–226, 2013.
[4] J. A. Razak, Y. Ali, M. A. Alghoul, M. Said Zainol, A. Zaharim, and K. Sopian, “Application of Crossflow Turbine in Off-Grid Pico Hydro Renewable Energy System,” Proceeding Am. -Math, no. January, pp. 519–526, 2010.
[5] S. Kamal, Pengembangan Energi Alternatif. Yogyakarta: Pusat Studi Energi Universitas Yogyakarta, 2009.
[6] M. H. Kurniawan and K. K. Ayuningtiyas, “Analisis Eksperimental Pengaruh Performa Aliran Natural ( Tanpa Pengarah ) dan Penggunaan Nozzle Pada Kincir Air Jenis Breastshot,” vol. 5, no. 1, pp. 39–42, 2022.
[7] J. A. Razak, Y. Ali, M. A. Alghoul, M. S. Zainol, A. Zaharim, and K. Sopian, “Application of crossflow turbine in off-grid pico hydro renewable energy system,” in AMERICAN-MATH’10: Proceedings of the 2010 American conference on Applied mathematics, 2010, pp. 519–526. [Online]. Available: https://dl.acm.org/doi/10.5555/1863981.1864077
[8] Y. S. Pramesti, “Analisa pengaruh sudut sudu terhadap kinerja turbin kinetik poros horisontal dan vertikal,” J. Mesin Nusant., vol. 1, no. 1, p. 51, 2018, doi: 10.29407/jmn.v1i1.12296.
[9] M. H. Kurniawan, R. Soenoko, Wiranto, and A. Sunarso, “Pengaruh Penambahan Nozzle Terhadap Pola Aliran Pada Kincir Air Breastshot,” Pros. SNAST, pp. 60–65, 2021, [Online]. Available: https://journal.akprind.ac.id/index.php/prosidingsnast/article/view/3358%0Ahttps://journal.akprind.ac.id/index.php/prosidingsnast/article/download/3358/2426
[10] J. Dalzochio et al., “Machine learning and reasoning for predictive maintenance in Industry 4.0: Current status and challenges,” Comput. Ind., vol. 123, p. 103298, 2020, doi: 10.1016/j.compind.2020.103298.
